This IS 2160 ECO is the 160 ° infrared motion detector with max. 12 m reach for wall mounting inside and outside. This IS 2160 ECO monitors with a 160 ° registration angle and a range of up to 12 m surfaces up to 170 m². The multilens divides the registration area. The total switching capacity is 600 W, the time and start level of the infrared motion detector can be individually controlled.

Light ON / OFF - automatically.
The highly innovative sensors react to movements and light conditions and automatically switch the light on and off after a configurable time.

Living comfortably and at the same time saving energy.
More quality of life, safety and energy savings thanks to intelligent sensor technology from STEINEL.

Technical data Infrared motion detector IS 2160 ECO white
European Article Number: (EAN) 4007841606015
Execution: Motion detector
Dimensions: (H x W x D) 113 x 78 x 73 mm
Power supply: 230 - 240 V, 50 Hz
Sensor type: Passive infrared
Application: inside and outside
Mounting: Wall
recommended installation height 2.00 m
max. power (ohmic load, eg lamp for universal use) 600 W
max. power (uncompensated, inductive, cos? = 0.5, eg fluorescent lamps) 500 VA
max. power (series compensated) 500 W
max. power (parallel compensated, with C? 45.6 ?F) 500 W
max. power (electronic ballasts, capacitive, eg energy-saving lamps) max. 4 pcs., C? 88 ?F
Angle of registration: 160 ° with 40 ° opening angle
reduction of the registration angle per segment possible Yes
Swivel range horizontal: 40 °
Swivel range vertical: 70 °
Range max. 12 m
Sensor 5 registration levels
260 switching zones
Switch-on strength 2-2000 lx
Time setting 8 sec. - 35 min.
IP54 protection (IP)
Protection class II
Temperature range -20- + 50 ° C
Variant: white