Lightpro - LED ground spot Agate
Colour: Silver gray
99.- (+ accessoires)
In stock: shipped today
Advantages:
Description
Agate is a high quality Lightpro 12 volt ground spot. This stainless steel ground spot is made of high quality stainless steel 16 and has an IP value of 67. This makes this Agate from Lightpro also applicable in wet areas and even in sea areas. Stainless steel 316 is more resistant to salt water than the standard stainless steel. This Lightpro 102U is equipped with a 3 watt MR16 led spot. It produces a light output of 190 lumens. Enough to highlight a tree up to about 2.2 meters high. The warm white color (3000K) ensures that the garden remains atmospheric despite the powerful light source. The MR16 fitting makes it possible to change the light source. This is possible, for example, if the supplied 3 watt light source is too strong or too weak, or if the light source stops early. The fitting is also rotatable so that the light beam can be aimed in the desired direction. At the 102U of Lightpro the following is included: - 0.5 meters of cable and connector to connect the luminaire to the Lightpro 12 volt mains cable - A mounting tube. This allows you to remove the spot from the ground without the hole being closed with soil. - Allen key. With this you can remove the lid from the spotlight to place the light source. Do not forget to put some Vaseline between the bolts. This prevents the spot from being opened after a number of years. Do not forget to tighten the screws firmly in order to guarantee the IP value. The 12 volt system from Lightpro makes it possible for everyone to easily install lighting in the garden. However, it is important to take a good look at which products you want and which accessories you need for this. 1. First check which places in the garden you wish to have lighting or which parts you wish to highlight. 2. Then determine which luminaires suit you and in what numbers 3. By adding the wattages of the products together you arrive at the total wattage. This determines whether you need a 21 watt (article number 158A), 60 watt (article number 144A) or 100 watt (article number 145A) transformer. 4. Measure how far the luminaires are coming from the transformer and you know how much cable you need. Different lengths can be obtained at Lightpro: 25 meters (article number 025C14), 50 meters (article number 050C14), 100 meters (article number 100C14) and 200 meters (article number 200C14) rolls. Of course the cable can be cut off at any desired location in order to get the correct length. Please note: at least one meter of cable is included with each Lightpro luminaire. Exactly how much is stated for each luminaire. If luminaires are placed on, for example, a fence, individual extension cables of 1 meter (article number 146A) or 3 meters (article number 147A) are also available. To make the Lightpro system complete, you will find various types of accessories such as a movement sensor (article number 165A) or a transmitter and receiver (article number 166A) under Lightpro category to switch on your lighting at a distance.
Lightpro Agate 12 Volt Ground Spot in Stainless Steel with IP67
The Lightpro Agate is a high-quality 12 volt ground spot specifically designed for garden lighting. This fixture is made from stainless steel 316, a material that is extra resistant to saltwater and therefore also suitable for damp and even seawater environments. With an IP67 rating, the Agate is completely dust-tight and protected against immersion in water, ensuring a long lifespan and reliable performance in various outdoor conditions.
Features and Light Performance
The Agate spot has a round shape with a diameter of 11.5 cm and a height of 11.3 cm. The fixture comes with a 3 watt MR16 LED light source delivering 195 lumens and a warm light color of 3000K. This light color creates a cozy and warm atmosphere in your garden. The beam angle is 36 degrees, allowing you to effectively highlight, for example, a tree up to approximately 2.2 meters high. The light source is not dimmable, but thanks to the MR16 fitting, you can easily replace or adjust the light source with the adjustable fitting.
12 Volt Garden Lighting System and Installation
A 12 volt garden lighting system operates at a lower voltage than traditional 230 volt lighting, making installation safer and easier. This system is energy-efficient and flexible to use, allowing you to place lighting in various spots in your garden without complicated wiring. The Agate spot comes with a 0.5 meter cable and connector for connection to the Lightpro 12 volt power cord, a mounting tube to easily install and remove the spot without contaminating the hole, and an Allen key for opening the fixture. For proper sealing and to maintain the IP67 rating, it is recommended to apply petroleum jelly between the bolts and tighten the screws firmly.
- Material: Stainless Steel 316
- IP Rating: IP67, suitable for wet and salty environments
- Dimensions: Ø 11.5 cm, height 11.3 cm
- Light Source: Includes MR16 3W LED, 195 lumens, 3000K warm white
- Voltage: 12 volt
- Application: Ground spot for accent lighting in the garden
- Mounting: Includes mounting tube and cable connector
- Warranty: 6 years
Specifications
- Product number 68106
- Manufacturer product number 102U
-
Light source
Inclusive
1 x 3W
MR16
1x 195 lumen, 3000K, Warm white - Type of light LED
- Dimmable No
- Material Stainless steel
- Window Glass
- IP value 67
- Angle/degree of light ray 36
- Saw diameter 9
- Line cord 1
- Voltage 12 volt
- Transformer not included Yes
- Type of spot Built-in
- Warranty 6
- Color Stainless steel
- Dimensions (H) x (Ø) : 11.3 x 11.5 cm
Downloads:
Agate is a high quality Lightpro 12 volt ground spot. This stainless steel ground spot is made of high quality stainless steel 16 and has an IP value of 67. This makes this Agate from Lightpro also applicable in wet areas and even in sea areas. Stainless steel 316 is more resistant to salt water than the standard stainless steel. This Lightpro 102U is equipped with a 3 watt MR16 led spot. It produces a light output of 190 lumens. Enough to highlight a tree up to about 2.2 meters high. The warm white color (3000K) ensures that the garden remains atmospheric despite the powerful light source. The MR16 fitting makes it possible to change the light source. This is possible, for example, if the supplied 3 watt light source is too strong or too weak, or if the light source stops early. The fitting is also rotatable so that the light beam can be aimed in the desired direction. At the 102U of Lightpro the following is included: - 0.5 meters of cable and connector to connect the luminaire to the Lightpro 12 volt mains cable - A mounting tube. This allows you to remove the spot from the ground without the hole being closed with soil. - Allen key. With this you can remove the lid from the spotlight to place the light source. Do not forget to put some Vaseline between the bolts. This prevents the spot from being opened after a number of years. Do not forget to tighten the screws firmly in order to guarantee the IP value. The 12 volt system from Lightpro makes it possible for everyone to easily install lighting in the garden. However, it is important to take a good look at which products you want and which accessories you need for this. 1. First check which places in the garden you wish to have lighting or which parts you wish to highlight. 2. Then determine which luminaires suit you and in what numbers 3. By adding the wattages of the products together you arrive at the total wattage. This determines whether you need a 21 watt (article number 158A), 60 watt (article number 144A) or 100 watt (article number 145A) transformer. 4. Measure how far the luminaires are coming from the transformer and you know how much cable you need. Different lengths can be obtained at Lightpro: 25 meters (article number 025C14), 50 meters (article number 050C14), 100 meters (article number 100C14) and 200 meters (article number 200C14) rolls. Of course the cable can be cut off at any desired location in order to get the correct length. Please note: at least one meter of cable is included with each Lightpro luminaire. Exactly how much is stated for each luminaire. If luminaires are placed on, for example, a fence, individual extension cables of 1 meter (article number 146A) or 3 meters (article number 147A) are also available. To make the Lightpro system complete, you will find various types of accessories such as a movement sensor (article number 165A) or a transmitter and receiver (article number 166A) under Lightpro category to switch on your lighting at a distance.
Lightpro Agate 12 Volt Ground Spot in Stainless Steel with IP67
The Lightpro Agate is a high-quality 12 volt ground spot specifically designed for garden lighting. This fixture is made from stainless steel 316, a material that is extra resistant to saltwater and therefore also suitable for damp and even seawater environments. With an IP67 rating, the Agate is completely dust-tight and protected against immersion in water, ensuring a long lifespan and reliable performance in various outdoor conditions.
Features and Light Performance
The Agate spot has a round shape with a diameter of 11.5 cm and a height of 11.3 cm. The fixture comes with a 3 watt MR16 LED light source delivering 195 lumens and a warm light color of 3000K. This light color creates a cozy and warm atmosphere in your garden. The beam angle is 36 degrees, allowing you to effectively highlight, for example, a tree up to approximately 2.2 meters high. The light source is not dimmable, but thanks to the MR16 fitting, you can easily replace or adjust the light source with the adjustable fitting.
12 Volt Garden Lighting System and Installation
A 12 volt garden lighting system operates at a lower voltage than traditional 230 volt lighting, making installation safer and easier. This system is energy-efficient and flexible to use, allowing you to place lighting in various spots in your garden without complicated wiring. The Agate spot comes with a 0.5 meter cable and connector for connection to the Lightpro 12 volt power cord, a mounting tube to easily install and remove the spot without contaminating the hole, and an Allen key for opening the fixture. For proper sealing and to maintain the IP67 rating, it is recommended to apply petroleum jelly between the bolts and tighten the screws firmly.
- Material: Stainless Steel 316
- IP Rating: IP67, suitable for wet and salty environments
- Dimensions: Ø 11.5 cm, height 11.3 cm
- Light Source: Includes MR16 3W LED, 195 lumens, 3000K warm white
- Voltage: 12 volt
- Application: Ground spot for accent lighting in the garden
- Mounting: Includes mounting tube and cable connector
- Warranty: 6 years
Lightpro Agate 12 Volt Ground Spot in Stainless Steel with IP67
The Lightpro Agate is a high-quality 12 volt ground spot specifically designed for garden lighting. This fixture is made from stainless steel 316, a material that is extra resistant to saltwater and therefore also suitable for damp and even seawater environments. With an IP67 rating, the Agate is completely dust-tight and protected against immersion in water, ensuring a long lifespan and reliable performance in various outdoor conditions.
Features and Light Performance
The Agate spot has a round shape with a diameter of 11.5 cm and a height of 11.3 cm. The fixture comes with a 3 watt MR16 LED light source delivering 195 lumens and a warm light color of 3000K. This light color creates a cozy and warm atmosphere in your garden. The beam angle is 36 degrees, allowing you to effectively highlight, for example, a tree up to approximately 2.2 meters high. The light source is not dimmable, but thanks to the MR16 fitting, you can easily replace or adjust the light source with the adjustable fitting.
12 Volt Garden Lighting System and Installation
A 12 volt garden lighting system operates at a lower voltage than traditional 230 volt lighting, making installation safer and easier. This system is energy-efficient and flexible to use, allowing you to place lighting in various spots in your garden without complicated wiring. The Agate spot comes with a 0.5 meter cable and connector for connection to the Lightpro 12 volt power cord, a mounting tube to easily install and remove the spot without contaminating the hole, and an Allen key for opening the fixture. For proper sealing and to maintain the IP67 rating, it is recommended to apply petroleum jelly between the bolts and tighten the screws firmly.
- Material: Stainless Steel 316
- IP Rating: IP67, suitable for wet and salty environments
- Dimensions: Ø 11.5 cm, height 11.3 cm
- Light Source: Includes MR16 3W LED, 195 lumens, 3000K warm white
- Voltage: 12 volt
- Application: Ground spot for accent lighting in the garden
- Mounting: Includes mounting tube and cable connector
- Warranty: 6 years
- Product number 68106
- Manufacturer product number 102U
-
Light source
Inclusive
1 x 3W
MR16
1x 195 lumen, 3000K, Warm white - Type of light LED
- Dimmable No
- Material Stainless steel
- Window Glass
- IP value 67
- Angle/degree of light ray 36
- Saw diameter 9
- Line cord 1
- Voltage 12 volt
- Transformer not included Yes
- Type of spot Built-in
- Warranty 6
- Color Stainless steel
- Dimensions (H) x (Ø) : 11.3 x 11.5 cm
Downloads:
- Free shipping*
- Personal advice
- Over 25,000 lamps in stock
FAQ
I want this
Lightpro - LED ground spot Agate
In stock: shipped today