In-lite - Downlight Puck 22 12 volt LED
Colour: Pearl Grey
Splitter
10.50
CBL-EXT CORD 1
11.-
75.- (+ accessoires)
In stock: shipped tomorrow
Advantages:
Description
The small PUCK 22 ground spot is perfect as subtle indicator lighting for your driveway, path, platform or jetty. The PUCK 22 has a diameter of 22 mm and is finished with an anodised aluminum cap in rosé silver. The light from the ground spots can already be seen from a great distance because of the lateral exit. PUCK 22 can also be used as mood light because of the non-glare light. The PUCK series comes in two different sizes and colors: PUCK (DARK) has a diameter of 60 mm, PUCK 22 (DARK) has a diameter of 22 mm. Applications: Path, Terrace, Driveway, Fence / Wall, Stairs Processing ground spots: Earth, Concrete, Grass, Natural Stone, Wood, Gravel Properties: Overcrowded You can use this ground spot in a hole in wood (wood drill) or stone (cooled diamond drill) with a diameter of 22 mm. This can possibly take care of a dealer or gardener. Pay attention! Only install the fixture in a right-angled hole in the right size to ensure that the spot is properly clamped without damaging the housing. Handy tapping plate PUCK 22 (DARK) is supplied with a tapping plate (60x60x5 mm). You use this during assembly to prevent damage to the anodised cap. For the sake of clarity, the brief explanation of the system is given below. This fixture belongs to the In-lite 12 volt system: In-lite outdoor lighting is based on low voltage (12 volts). Inlite lighting is therefore safe and easy to install yourself. You only need a transformer and 12 volt cable from Inlite. The transformer controls the lighting and gives power to the system. With the aid of the Inlite light sensor, the lighting automatically switches on when it gets dark and with the timer you can set the number of burning hours. The low-voltage cable conducts the current and ensures that the luminaires are lit. Always make sure that your Inlite transformer has sufficient power (watts) for the luminaires in your lighting plan. In addition, when selecting the 12-volt cable, consider the maximum distance you can travel with it.
How does the In-lite 12 volt system work?
The In-lite 12 volt system has been developed to easily illuminate your garden completely. You need various parts to operate In-lite lighting fixtures. If you know which fixtures you want and in what quantities, add all the wattages of the fixtures together. With In-lite this is expressed in VA (volt-ampere). For this article that is [VA]VA. Depending on the total power, you choose the HUB-50 (total power 50VA ) or the HUB-100 (total power 100VA).
After you know which transformer you need, see how many meters of cable you need. In-lite uses two types of cables: a 14/2 cable and a 10/2 cable. The 14/2 is the thinnest of the two and has a maximum linear length of 40 meters. This does not mean that the total number of meters of cables in your garden should not exceed 40, but that the furthest point of the cable should not be more than 40 meters from the transformer. For the 10/2 variant this is 80 meters. In-lite offers the cables in different lengths.
To use the In-lite system as efficiently as possible, you can expand the system with the motion sensor MOVE. There is an extra connection in the transformer for the motion sensor. This causes the entire system to turn on when the motion sensor detects movement. A 2 meter cable is supplied as standard with the MOVE. If this is too short, there is also a 5 meter extension cable which allows you to hang the MOVE further from the transformer. Please note, this is possible up to a maximum of 20 meters.
Once you have the cable in the garden, you can connect the lighting fixtures to it. Each fixture comes with an Easy-lock (connector from In-lite) that allows you to connect the lamp to the main cable. Of course, it may sometimes happen that you have to move in multiple directions in your garden. With the cable connector CC-2 you can easily make a branch at any desired location on the cable.
Specifications
- Product number 71452
- Manufacturer product number 10104170
-
Light source
Inclusive
1 x 0.5W
Led-panel
1x 3 lumen, 2900K, Warm white - Type of light LED
- Dimmable No
- Material Plastics
- Window Plastics
- IP value 67
- Angle/degree of light ray 180
- Saw diameter 2
- Built-in depth 6
- Voltage 12 volt
- Transformer not included Yes
- VA 1
- Type of spot Built-in
- Warranty 5
- Color Grey
- Dimensions (H) x (Ø) : 43 x 35 cm
The small PUCK 22 ground spot is perfect as subtle indicator lighting for your driveway, path, platform or jetty. The PUCK 22 has a diameter of 22 mm and is finished with an anodised aluminum cap in rosé silver. The light from the ground spots can already be seen from a great distance because of the lateral exit. PUCK 22 can also be used as mood light because of the non-glare light. The PUCK series comes in two different sizes and colors: PUCK (DARK) has a diameter of 60 mm, PUCK 22 (DARK) has a diameter of 22 mm. Applications: Path, Terrace, Driveway, Fence / Wall, Stairs Processing ground spots: Earth, Concrete, Grass, Natural Stone, Wood, Gravel Properties: Overcrowded You can use this ground spot in a hole in wood (wood drill) or stone (cooled diamond drill) with a diameter of 22 mm. This can possibly take care of a dealer or gardener. Pay attention! Only install the fixture in a right-angled hole in the right size to ensure that the spot is properly clamped without damaging the housing. Handy tapping plate PUCK 22 (DARK) is supplied with a tapping plate (60x60x5 mm). You use this during assembly to prevent damage to the anodised cap. For the sake of clarity, the brief explanation of the system is given below. This fixture belongs to the In-lite 12 volt system: In-lite outdoor lighting is based on low voltage (12 volts). Inlite lighting is therefore safe and easy to install yourself. You only need a transformer and 12 volt cable from Inlite. The transformer controls the lighting and gives power to the system. With the aid of the Inlite light sensor, the lighting automatically switches on when it gets dark and with the timer you can set the number of burning hours. The low-voltage cable conducts the current and ensures that the luminaires are lit. Always make sure that your Inlite transformer has sufficient power (watts) for the luminaires in your lighting plan. In addition, when selecting the 12-volt cable, consider the maximum distance you can travel with it.
How does the In-lite 12 volt system work?
The In-lite 12 volt system has been developed to easily illuminate your garden completely. You need various parts to operate In-lite lighting fixtures. If you know which fixtures you want and in what quantities, add all the wattages of the fixtures together. With In-lite this is expressed in VA (volt-ampere). For this article that is [VA]VA. Depending on the total power, you choose the HUB-50 (total power 50VA ) or the HUB-100 (total power 100VA).
After you know which transformer you need, see how many meters of cable you need. In-lite uses two types of cables: a 14/2 cable and a 10/2 cable. The 14/2 is the thinnest of the two and has a maximum linear length of 40 meters. This does not mean that the total number of meters of cables in your garden should not exceed 40, but that the furthest point of the cable should not be more than 40 meters from the transformer. For the 10/2 variant this is 80 meters. In-lite offers the cables in different lengths.
To use the In-lite system as efficiently as possible, you can expand the system with the motion sensor MOVE. There is an extra connection in the transformer for the motion sensor. This causes the entire system to turn on when the motion sensor detects movement. A 2 meter cable is supplied as standard with the MOVE. If this is too short, there is also a 5 meter extension cable which allows you to hang the MOVE further from the transformer. Please note, this is possible up to a maximum of 20 meters.
Once you have the cable in the garden, you can connect the lighting fixtures to it. Each fixture comes with an Easy-lock (connector from In-lite) that allows you to connect the lamp to the main cable. Of course, it may sometimes happen that you have to move in multiple directions in your garden. With the cable connector CC-2 you can easily make a branch at any desired location on the cable.
How does the In-lite 12 volt system work?
The In-lite 12 volt system has been developed to easily illuminate your garden completely. You need various parts to operate In-lite lighting fixtures. If you know which fixtures you want and in what quantities, add all the wattages of the fixtures together. With In-lite this is expressed in VA (volt-ampere). For this article that is [VA]VA. Depending on the total power, you choose the HUB-50 (total power 50VA ) or the HUB-100 (total power 100VA).
After you know which transformer you need, see how many meters of cable you need. In-lite uses two types of cables: a 14/2 cable and a 10/2 cable. The 14/2 is the thinnest of the two and has a maximum linear length of 40 meters. This does not mean that the total number of meters of cables in your garden should not exceed 40, but that the furthest point of the cable should not be more than 40 meters from the transformer. For the 10/2 variant this is 80 meters. In-lite offers the cables in different lengths.
To use the In-lite system as efficiently as possible, you can expand the system with the motion sensor MOVE. There is an extra connection in the transformer for the motion sensor. This causes the entire system to turn on when the motion sensor detects movement. A 2 meter cable is supplied as standard with the MOVE. If this is too short, there is also a 5 meter extension cable which allows you to hang the MOVE further from the transformer. Please note, this is possible up to a maximum of 20 meters.
Once you have the cable in the garden, you can connect the lighting fixtures to it. Each fixture comes with an Easy-lock (connector from In-lite) that allows you to connect the lamp to the main cable. Of course, it may sometimes happen that you have to move in multiple directions in your garden. With the cable connector CC-2 you can easily make a branch at any desired location on the cable.
- Product number 71452
- Manufacturer product number 10104170
-
Light source
Inclusive
1 x 0.5W
Led-panel
1x 3 lumen, 2900K, Warm white - Type of light LED
- Dimmable No
- Material Plastics
- Window Plastics
- IP value 67
- Angle/degree of light ray 180
- Saw diameter 2
- Built-in depth 6
- Voltage 12 volt
- Transformer not included Yes
- VA 1
- Type of spot Built-in
- Warranty 5
- Color Grey
- Dimensions (H) x (Ø) : 43 x 35 cm
- Free shipping*
- Personal advice
- Over 25,000 lamps in stock
Kom langs voor persoonlijk advies
Dit product is <b>fysiek te zien in onze showroom</b>. Kom gerust langs voor een vrijblijvend adviesgesprek. Onze specialisten helpen je graag bij het kiezen van het model dat perfect bij jou past. Je bent altijd welkom zonder afspraak tijdens onze openingstijden. Wil je zeker weten dat er tijd voor je is gereserveerd? Plan dan hiernaast eenvoudig een afspraak in. Zo ben je verzekerd van persoonlijke aandacht. <i>Wij staan klaar om je te helpen: met of zonder afspraak.</i>
Maak een afspraakFAQ
I want this
In-lite - Downlight Puck 22 12 volt LED
75.- (+ accessoires)
In stock: shipped tomorrow
