In-lite - Surface spot Cubid 12 volt LED
Colour: Rose Silver
CBL-EXT CORD 1
11.-
CBL-EXT CORD 3
21.-
Splitter
10.50
65.- (+ accessoires)
2 - 4 working days
Advantages:
Description
Cubid, the Cubid from In-lite is a subtle wall lamp with a cubic, silver-coated aluminum housing. This Cubid is difficult to call a spot, but as an outdoor light we do it again short, this lamp from In-lite is so functional that you can use your light creativeit unlimited. Consider, for example, placing on a fence, or a Hedra dividing wall, then the Cubid shines so nicely over the fence or Hedra, that light is so soft and warm, where you also do not look in the light source itself, so you will not be blinded either. Also on gazebos or near the pond edge, it is well suited, even the Cubid is used in the refuse containers to give a subtle light to see where you are walking. In short, the Cubid from In-lite is an LED lamp that can be used everywhere for relatively little money if you look at the quality. He only has an energy consumption of 0.5 watts and yet a light range of over 1 meter with a light angle of 84 degrees. Because of the size, it is also beautiful on pergola poles, it is only 5 x 5.3 cm, so the application is virtually unlimited. The In-lite Cubid is easy to connect to the well-known In-lite 12 volt system. Of course, the screws are included. For the sake of clarity, the brief explanation of the system is given below. This fixture belongs to the In-lite 12 volt system: In-lite outdoor lighting is based on low voltage (12 volts). Inlite lighting is therefore safe and easy to install yourself. You only need a transformer and 12 volt cable from Inlite. The transformer controls the lighting and gives power to the system. With the aid of the Inlite light sensor, the lighting automatically switches on when it gets dark and with the timer you can set the number of burning hours. The low-voltage cable conducts the current and ensures that the luminaires are lit. Always make sure that your Inlite transformer has sufficient power (watts) for the luminaires in your lighting plan. In addition, when selecting the 12-volt cable, consider the maximum distance you can travel with it.
How does the In-lite 12 volt system work?
The In-lite 12 volt system has been developed to easily illuminate your garden completely. You need various parts to operate In-lite lighting fixtures. If you know which fixtures you want and in what quantities, add all the wattages of the fixtures together. With In-lite this is expressed in VA (volt-ampere). For this article that is [VA]VA. Depending on the total power, you choose the HUB-50 (total power 50VA ) or the HUB-100 (total power 100VA).
After you know which transformer you need, see how many meters of cable you need. In-lite uses two types of cables: a 14/2 cable and a 10/2 cable. The 14/2 is the thinnest of the two and has a maximum linear length of 40 meters. This does not mean that the total number of meters of cables in your garden should not exceed 40, but that the furthest point of the cable should not be more than 40 meters from the transformer. For the 10/2 variant this is 80 meters. In-lite offers the cables in different lengths.
Â
To use the In-lite system as efficiently as possible, you can expand the system with the motion sensor MOVE. There is an extra connection in the transformer for the motion sensor. This causes the entire system to turn on when the motion sensor detects movement. A 2 meter cable is supplied as standard with the MOVE. If this is too short, there is also a 5 meter extension cable which allows you to hang the MOVE further from the transformer. Please note, this is possible up to a maximum of 20 meters.
Once you have the cable in the garden, you can connect the lighting fixtures to it. Each fixture comes with an Easy-lock (connector from In-lite) that allows you to connect the lamp to the main cable. Of course, it may sometimes happen that you have to move in multiple directions in your garden. With the cable connector CC-2 you can easily make a branch at any desired location on the cable.
Specifications
- Product number 20873
- Manufacturer product number 10301001
-
Light source
Inclusive
1 x 0.5W
Led-panel
3000K, Warm white - Type of light LED
- Dimmable No
- Material Aluminium
- Window Poly-carbonate
- IP value 67
- Angle/degree of light ray 84
- Line cord 1
- Voltage 12 volt
- Transformer not included Yes
- VA 1
- Type of spot Mounted
- Light direction Down
- Reach 1
- Warranty 5
- Color Grey
- Dimensions (W) x (D) : 5 x 53 cm
Cubid, the Cubid from In-lite is a subtle wall lamp with a cubic, silver-coated aluminum housing. This Cubid is difficult to call a spot, but as an outdoor light we do it again short, this lamp from In-lite is so functional that you can use your light creativeit unlimited. Consider, for example, placing on a fence, or a Hedra dividing wall, then the Cubid shines so nicely over the fence or Hedra, that light is so soft and warm, where you also do not look in the light source itself, so you will not be blinded either. Also on gazebos or near the pond edge, it is well suited, even the Cubid is used in the refuse containers to give a subtle light to see where you are walking. In short, the Cubid from In-lite is an LED lamp that can be used everywhere for relatively little money if you look at the quality. He only has an energy consumption of 0.5 watts and yet a light range of over 1 meter with a light angle of 84 degrees. Because of the size, it is also beautiful on pergola poles, it is only 5 x 5.3 cm, so the application is virtually unlimited. The In-lite Cubid is easy to connect to the well-known In-lite 12 volt system. Of course, the screws are included. For the sake of clarity, the brief explanation of the system is given below. This fixture belongs to the In-lite 12 volt system: In-lite outdoor lighting is based on low voltage (12 volts). Inlite lighting is therefore safe and easy to install yourself. You only need a transformer and 12 volt cable from Inlite. The transformer controls the lighting and gives power to the system. With the aid of the Inlite light sensor, the lighting automatically switches on when it gets dark and with the timer you can set the number of burning hours. The low-voltage cable conducts the current and ensures that the luminaires are lit. Always make sure that your Inlite transformer has sufficient power (watts) for the luminaires in your lighting plan. In addition, when selecting the 12-volt cable, consider the maximum distance you can travel with it.
How does the In-lite 12 volt system work?
The In-lite 12 volt system has been developed to easily illuminate your garden completely. You need various parts to operate In-lite lighting fixtures. If you know which fixtures you want and in what quantities, add all the wattages of the fixtures together. With In-lite this is expressed in VA (volt-ampere). For this article that is [VA]VA. Depending on the total power, you choose the HUB-50 (total power 50VA ) or the HUB-100 (total power 100VA).
After you know which transformer you need, see how many meters of cable you need. In-lite uses two types of cables: a 14/2 cable and a 10/2 cable. The 14/2 is the thinnest of the two and has a maximum linear length of 40 meters. This does not mean that the total number of meters of cables in your garden should not exceed 40, but that the furthest point of the cable should not be more than 40 meters from the transformer. For the 10/2 variant this is 80 meters. In-lite offers the cables in different lengths.
Â
To use the In-lite system as efficiently as possible, you can expand the system with the motion sensor MOVE. There is an extra connection in the transformer for the motion sensor. This causes the entire system to turn on when the motion sensor detects movement. A 2 meter cable is supplied as standard with the MOVE. If this is too short, there is also a 5 meter extension cable which allows you to hang the MOVE further from the transformer. Please note, this is possible up to a maximum of 20 meters.
Once you have the cable in the garden, you can connect the lighting fixtures to it. Each fixture comes with an Easy-lock (connector from In-lite) that allows you to connect the lamp to the main cable. Of course, it may sometimes happen that you have to move in multiple directions in your garden. With the cable connector CC-2 you can easily make a branch at any desired location on the cable.
How does the In-lite 12 volt system work?
The In-lite 12 volt system has been developed to easily illuminate your garden completely. You need various parts to operate In-lite lighting fixtures. If you know which fixtures you want and in what quantities, add all the wattages of the fixtures together. With In-lite this is expressed in VA (volt-ampere). For this article that is [VA]VA. Depending on the total power, you choose the HUB-50 (total power 50VA ) or the HUB-100 (total power 100VA).
After you know which transformer you need, see how many meters of cable you need. In-lite uses two types of cables: a 14/2 cable and a 10/2 cable. The 14/2 is the thinnest of the two and has a maximum linear length of 40 meters. This does not mean that the total number of meters of cables in your garden should not exceed 40, but that the furthest point of the cable should not be more than 40 meters from the transformer. For the 10/2 variant this is 80 meters. In-lite offers the cables in different lengths.
Â
To use the In-lite system as efficiently as possible, you can expand the system with the motion sensor MOVE. There is an extra connection in the transformer for the motion sensor. This causes the entire system to turn on when the motion sensor detects movement. A 2 meter cable is supplied as standard with the MOVE. If this is too short, there is also a 5 meter extension cable which allows you to hang the MOVE further from the transformer. Please note, this is possible up to a maximum of 20 meters.
Once you have the cable in the garden, you can connect the lighting fixtures to it. Each fixture comes with an Easy-lock (connector from In-lite) that allows you to connect the lamp to the main cable. Of course, it may sometimes happen that you have to move in multiple directions in your garden. With the cable connector CC-2 you can easily make a branch at any desired location on the cable.
- Product number 20873
- Manufacturer product number 10301001
-
Light source
Inclusive
1 x 0.5W
Led-panel
3000K, Warm white - Type of light LED
- Dimmable No
- Material Aluminium
- Window Poly-carbonate
- IP value 67
- Angle/degree of light ray 84
- Line cord 1
- Voltage 12 volt
- Transformer not included Yes
- VA 1
- Type of spot Mounted
- Light direction Down
- Reach 1
- Warranty 5
- Color Grey
- Dimensions (W) x (D) : 5 x 53 cm
- Free shipping*
- Personal advice
- Over 25,000 lamps in stock
Kom langs voor persoonlijk advies
Dit model is niet aanwezig in onze showroom, maar laat je gerust inspireren door ons uitgebreide aanbod aan andere modellen. Tijdens een vrijblijvend adviesgesprek denken onze specialisten graag met je mee over de beste keuze voor jouw situatie. Je bent altijd welkom tijdens openingstijden. Wil je verzekerd zijn van alle aandacht? Plan dan vooraf een afspraak in.
Maak een afspraakFAQ
I want this
In-lite - Surface spot Cubid 12 volt LED
65.- (+ accessoires)
2 - 4 working days
