Description

In-lite FIXATION SET 100 A large part of the luminaires from the Integrated range is suitable for processing in wood. For the installation of a circular fixture in wood, use a hole drill with the correct diameter; these are available at in-lite. For installation of luminaires with a diameter of 60 and 100 mm, special mounting kits are available (FIXATION SET Ø60 and FIXATION SET Ø100). With this you can attach the fixture to the wood. A number of Integrated luminaires have a larger ring as standard or you can opt for a larger ring or cover plate. Depending on the fixture, you can mount it so that it rests on the surface or you can place it 'sunken' so that the ring is flush with the wood surface. For this purpose, in-lite special drills are available, which drill both the hole and the extra edge for the ring. With the square luminaires you can remove the plastic housing in a number of cases, after which you can build up the luminaire. You will find further instructions for processing in wood in the manual for the relevant products.

How does the In-lite 12 volt system work?

The In-lite 12 volt system has been developed to easily illuminate your garden completely. You need various parts to operate In-lite lighting fixtures. If you know which fixtures you want and in what quantities, add all the wattages of the fixtures together. With In-lite this is expressed in VA (volt-ampere). For this article that is [VA]VA. Depending on the total power, you choose the HUB-50 (total power 50VA ) or the HUB-100 (total power 100VA).

After you know which transformer you need, see how many meters of cable you need. In-lite uses two types of cables: a 14/2 cable and a 10/2 cable. The 14/2 is the thinnest of the two and has a maximum linear length of 40 meters. This does not mean that the total number of meters of cables in your garden should not exceed 40, but that the furthest point of the cable should not be more than 40 meters from the transformer. For the 10/2 variant this is 80 meters. In-lite offers the cables in different lengths.

To use the In-lite system as efficiently as possible, you can expand the system with the motion sensor MOVE. There is an extra connection in the transformer for the motion sensor. This causes the entire system to turn on when the motion sensor detects movement. A 2 meter cable is supplied as standard with the MOVE. If this is too short, there is also a 5 meter extension cable which allows you to hang the MOVE further from the transformer. Please note, this is possible up to a maximum of 20 meters.

Once you have the cable in the garden, you can connect the lighting fixtures to it. Each fixture comes with an Easy-lock (connector from In-lite) that allows you to connect the lamp to the main cable. Of course, it may sometimes happen that you have to move in multiple directions in your garden. With the cable connector CC-2 you can easily make a branch at any desired location on the cable.