In-lite - Extension rod Riser 2 for Scope spots

We recommend ordering these matching products:

Complete your lamp:

CBL-EXT CORD 1

Simply order this 1 meter extension cable if you need to extend an In-lite fixture.

11.-

Splitter

With splitter, a light sensor can be connected to multiple transformers, so that the entire lighting plan will switch on at the same time.

10.50

47.- (+ accessoires)

In stock: shipped today

Your question *

Phone number

Email address*

Advantages:

30 days return period

Buy now, pay later, for free

Trusted Shops score: 4.58 / 5

Description

Riser 2 from In-lite, is suitable for the update models of the Scope series. Think of the Scope, Big Scope and the Big Scope Narrow. This riser has been developed to increase the In-lite Scope. This In-lite RISER can be used in combination with a base plate or with a Scope on a ground spike. The height of the RISER is 35 cm, so that your light point is considerably higher than the standard height of the Scope on key. Because the Riser is made of aluminum, it is a robust extension for your In-lite Scope garden spot. This Inlite riser can easily be placed between the ground pin or base plate and the Scope by tightening the two supplied wing screws.

How does the In-lite 12 volt system work?

The In-lite 12 volt system has been developed to easily illuminate your garden completely. You need various parts to operate In-lite lighting fixtures. If you know which fixtures you want and in what quantities, add all the wattages of the fixtures together. With In-lite this is expressed in VA (volt-ampere). For this article that is [VA]VA. Depending on the total power, you choose the HUB-50 (total power 50VA ) or the HUB-100 (total power 100VA).

After you know which transformer you need, see how many meters of cable you need. In-lite uses two types of cables: a 14/2 cable and a 10/2 cable. The 14/2 is the thinnest of the two and has a maximum linear length of 40 meters. This does not mean that the total number of meters of cables in your garden should not exceed 40, but that the furthest point of the cable should not be more than 40 meters from the transformer. For the 10/2 variant this is 80 meters. In-lite offers the cables in different lengths.

To use the In-lite system as efficiently as possible, you can expand the system with the motion sensor MOVE. There is an extra connection in the transformer for the motion sensor. This causes the entire system to turn on when the motion sensor detects movement. A 2 meter cable is supplied as standard with the MOVE. If this is too short, there is also a 5 meter extension cable which allows you to hang the MOVE further from the transformer. Please note, this is possible up to a maximum of 20 meters.

Once you have the cable in the garden, you can connect the lighting fixtures to it. Each fixture comes with an Easy-lock (connector from In-lite) that allows you to connect the lamp to the main cable. Of course, it may sometimes happen that you have to move in multiple directions in your garden. With the cable connector CC-2 you can easily make a branch at any desired location on the cable.

Specifications

Product number 75696
Manufacturer product number 10703405
Material Aluminium
Warranty 5
Color Black
Dimensions (H) x (Ø) : 35 x 3.7 cm

Riser 2 from In-lite, is suitable for the update models of the Scope series. Think of the Scope, Big Scope and the Big Scope Narrow. This riser has been developed to increase the In-lite Scope. This In-lite RISER can be used in combination with a base plate or with a Scope on a ground spike. The height of the RISER is 35 cm, so that your light point is considerably higher than the standard height of the Scope on key. Because the Riser is made of aluminum, it is a robust extension for your In-lite Scope garden spot. This Inlite riser can easily be placed between the ground pin or base plate and the Scope by tightening the two supplied wing screws.

How does the In-lite 12 volt system work?

The In-lite 12 volt system has been developed to easily illuminate your garden completely. You need various parts to operate In-lite lighting fixtures. If you know which fixtures you want and in what quantities, add all the wattages of the fixtures together. With In-lite this is expressed in VA (volt-ampere). For this article that is [VA]VA. Depending on the total power, you choose the HUB-50 (total power 50VA ) or the HUB-100 (total power 100VA).

After you know which transformer you need, see how many meters of cable you need. In-lite uses two types of cables: a 14/2 cable and a 10/2 cable. The 14/2 is the thinnest of the two and has a maximum linear length of 40 meters. This does not mean that the total number of meters of cables in your garden should not exceed 40, but that the furthest point of the cable should not be more than 40 meters from the transformer. For the 10/2 variant this is 80 meters. In-lite offers the cables in different lengths.

To use the In-lite system as efficiently as possible, you can expand the system with the motion sensor MOVE. There is an extra connection in the transformer for the motion sensor. This causes the entire system to turn on when the motion sensor detects movement. A 2 meter cable is supplied as standard with the MOVE. If this is too short, there is also a 5 meter extension cable which allows you to hang the MOVE further from the transformer. Please note, this is possible up to a maximum of 20 meters.

Once you have the cable in the garden, you can connect the lighting fixtures to it. Each fixture comes with an Easy-lock (connector from In-lite) that allows you to connect the lamp to the main cable. Of course, it may sometimes happen that you have to move in multiple directions in your garden. With the cable connector CC-2 you can easily make a branch at any desired location on the cable.

Product number 75696
Manufacturer product number 10703405
Material Aluminium
Warranty 5
Color Black
Dimensions (H) x (Ø) : 35 x 3.7 cm

Free shipping*
Personal advice
Over 25,000 lamps in stock

Delivery information

Al onze pakketten worden met DPD verzonden. U ontvangt een tracking-link om de bestelling te volgen.

Voor bestelling boven de 49 euro geldt dat deze gratis wordt verzonden. Onder dit bedrag vragen we een bijdrage van 5,95.

Ophalen? Dat kan ook! In de winkelwagen kunt u kiezen voor ophalen in onze winkel. De eventuele verzendkosten komen dan te vervallen.

Kom langs voor persoonlijk advies

Dit model is niet aanwezig in onze showroom, maar laat je gerust inspireren door ons uitgebreide aanbod aan andere modellen. Tijdens een vrijblijvend adviesgesprek denken onze specialisten graag met je mee over de beste keuze voor jouw situatie. Je bent altijd welkom tijdens openingstijden. Wil je verzekerd zijn van alle aandacht? Plan dan vooraf een afspraak in.

Maak een afspraak

FAQ

To return an item to LampsTotal, please contact customer service within the specified return period to obtain a return number and further instructions. Make sure the product has not been used, is in its original packaging, and is in good condition. Follow the customer service instructions to properly process your return. For more information, please visit this page.

LampsTotal also has a showroom. You can find all the information on this page. Note! Currently, no indoor lighting is on display.

Yes, Lampstotal offers the option to pay afterward, allowing you to receive and evaluate the product before making the payment. During the checkout process, you can see which payment methods allow you to pay afterward.

You can contact us in different ways. The most common options are the following: the telephone, email, and chat. You can contact us via this page.

The delivery time at LampsTotal varies depending on the product, availability, and stock status. You can find the estimated delivery time on the product page. For products that are directly in stock, we strive to ship orders before 5:00 PM on the same day.