Lightpro - LED pedestal light Barite 40
109.- (+ accessoires)
Prices incl. VAT plus shipping costs
3 - 5
Advantages:
Description
This Barite 40 from Lightpro is a designer terrace lamp that can also be used as path lighting. With a 3 watt strong MR16 light source this Barite 40 illuminates up to 75 centimeters. If you want light over the entire length, we advise you to place this Barite 40 every half meter. This way you will never walk in the dark again. The MR16 fitting allows you to easily change the light source if it stops early or if the supplied 3 watts is not strong enough. With the 112P from Lightpro the following is included: - 1 meter of cable and connector to connect the fixture to the Lightpro 12 volt mains cable. - Mounting pin to place the fixture in the ground. - Allen key. With this you can place standing light on the foot. Do not forget to put some Vaseline between the bolts. This prevents the standing lamp from being opened again after a number of years. Do not forget to tighten the screws firmly in order to guarantee the IP value. - Screws and plugs to mount the luminaire in the right way. The 12 volt system from Lightpro makes it possible for everyone to easily install lighting in the garden. However, it is important to take a good look at which products you want and which accessories you need for this. 1. First check which places in the garden you wish to have lighting or which parts you wish to highlight. 2. Then determine which luminaires suit you and in what numbers 3. By adding the wattages of the products together you arrive at the total wattage. This determines whether you need a 21 watt (article number 158A), 60 watt (article number 144A) or 100 watt (article number 145A) transformer. 4. Measure how far the luminaires are coming from the transformer and you know how much cable you need. Different lengths can be obtained at Lightpro: 25 meters (article number 025C14), 50 meters (article number 050C14), 100 meters (article number 100C14) and 200 meters (article number 200C14) rolls. Of course the cable can be cut off at any desired location in order to get the correct length. Please note: at least one meter of cable is included with each Lightpro luminaire. Exactly how much is stated for each luminaire. If luminaires are placed on, for example, a fence, individual extension cables of 1 meter (article number 146A) or 3 meters (article number 147A) are also available. To complete the Lightpro system, you can find various types of accessories such as a motion sensor (article number 165A) or a transmitter and receiver (article number 166A) at www.lampstotal.com/lightpro to switch on your lighting at a distance.
This Barite 40 from Lightpro is a designer patio lamp that can of course also be used as path lighting. With a 3 watt strong MR16 light source, this Barite illuminates 40 up to 75 centimeters. If you want light over the entire length, it is recommended to place this Barite 40 every one and a half meters. This means you will never walk in the dark again. The MR16 fitting ensures that you can easily change the light source if it stops working prematurely or if the supplied 3 watts are not strong enough. The 112P from Lightpro is supplied with the following: p>
- 1 meter cable and connector to connect the fixture to the 12 volt main cable from Lightpro.
- Mounting wedge to place the fixture in the ground.
- Allen wrench. This allows you to place a standing lamp on the base. Don't forget to put some Vaseline between the bolts. This prevents the floor lamp from becoming impossible to open after a number of years. Do not forget to tighten the screws securely to guarantee the IP value.
- Screws and plugs to properly mount the fixture.
- Connector type F (female) to attach the lamp to the cable.
Lightpro 12 volt system
The 12 volt system from Lightpro makes it possible for everyone to easily install lighting in the garden. It is important to look carefully at which products you want and which accessories you need.
- First check which places in the garden you want to have lighting or which parts you want to highlight.
- Then determine which fixtures suit your needs and in what quantities
- By adding the wattages of the products together you arrive at the total wattage. This determines whether you need a 21 watt (item number 158A), 60 watt (item number 144A) or 100 watt (item number 145A) transformer.
- Measure how far the fixtures come from the transformer and you will know how much cable you need. Lightpro offers different lengths: 25 meters (item number 025C14), 50 meters (item number 050C14), 100 meters (item number 100C14) and 200 meters (item number 200C14) rolls. The cable can of course be cut at any desired location to obtain the correct length. Please note: at least 1 meter of cable is also included with every Lightpro fixture. The exact amount is stated for each fixture. If luminaires are placed on a fence, for example, individual extension cables of 1 meter (item number 146A) or 3 meters (item number 147A) are also available. To complete the Lightpro system, you can find it at www.lampentotaal.nl/Lightpro various types of accessories such as a motion sensor (item number 165A) or a transmitter and receiver (item number 166A) to switch on your lighting remotely. The connector type F (female) is supplied as standard. This can be used to attach the lamp to the main cable.
Specifications
- Product number 68090
- Manufacturer product number 112P
- Light source Inclusive
- Type of light amount 1
- Fitting MR16
- Wattage 3
- Type of light LED
- Amount of lumen 230
- Light colour Warm white
- Light temperature 3000
- Dimmable No
- Material Aluminium
- IP value 44
- Style Design, Rustic, Timeless
- Height 40.5
- Diameter 6.5
- Line cord 1
- Voltage 12 volt
- Transformer not included Yes
- Shape Cilinder
- Warranty 6
- Color Black
This Barite 40 from Lightpro is a designer terrace lamp that can also be used as path lighting. With a 3 watt strong MR16 light source this Barite 40 illuminates up to 75 centimeters. If you want light over the entire length, we advise you to place this Barite 40 every half meter. This way you will never walk in the dark again. The MR16 fitting allows you to easily change the light source if it stops early or if the supplied 3 watts is not strong enough. With the 112P from Lightpro the following is included: - 1 meter of cable and connector to connect the fixture to the Lightpro 12 volt mains cable. - Mounting pin to place the fixture in the ground. - Allen key. With this you can place standing light on the foot. Do not forget to put some Vaseline between the bolts. This prevents the standing lamp from being opened again after a number of years. Do not forget to tighten the screws firmly in order to guarantee the IP value. - Screws and plugs to mount the luminaire in the right way. The 12 volt system from Lightpro makes it possible for everyone to easily install lighting in the garden. However, it is important to take a good look at which products you want and which accessories you need for this. 1. First check which places in the garden you wish to have lighting or which parts you wish to highlight. 2. Then determine which luminaires suit you and in what numbers 3. By adding the wattages of the products together you arrive at the total wattage. This determines whether you need a 21 watt (article number 158A), 60 watt (article number 144A) or 100 watt (article number 145A) transformer. 4. Measure how far the luminaires are coming from the transformer and you know how much cable you need. Different lengths can be obtained at Lightpro: 25 meters (article number 025C14), 50 meters (article number 050C14), 100 meters (article number 100C14) and 200 meters (article number 200C14) rolls. Of course the cable can be cut off at any desired location in order to get the correct length. Please note: at least one meter of cable is included with each Lightpro luminaire. Exactly how much is stated for each luminaire. If luminaires are placed on, for example, a fence, individual extension cables of 1 meter (article number 146A) or 3 meters (article number 147A) are also available. To complete the Lightpro system, you can find various types of accessories such as a motion sensor (article number 165A) or a transmitter and receiver (article number 166A) at www.lampstotal.com/lightpro to switch on your lighting at a distance.
This Barite 40 from Lightpro is a designer patio lamp that can of course also be used as path lighting. With a 3 watt strong MR16 light source, this Barite illuminates 40 up to 75 centimeters. If you want light over the entire length, it is recommended to place this Barite 40 every one and a half meters. This means you will never walk in the dark again. The MR16 fitting ensures that you can easily change the light source if it stops working prematurely or if the supplied 3 watts are not strong enough. The 112P from Lightpro is supplied with the following: p>
- 1 meter cable and connector to connect the fixture to the 12 volt main cable from Lightpro.
- Mounting wedge to place the fixture in the ground.
- Allen wrench. This allows you to place a standing lamp on the base. Don't forget to put some Vaseline between the bolts. This prevents the floor lamp from becoming impossible to open after a number of years. Do not forget to tighten the screws securely to guarantee the IP value.
- Screws and plugs to properly mount the fixture.
- Connector type F (female) to attach the lamp to the cable.
Lightpro 12 volt system
The 12 volt system from Lightpro makes it possible for everyone to easily install lighting in the garden. It is important to look carefully at which products you want and which accessories you need.
- First check which places in the garden you want to have lighting or which parts you want to highlight.
- Then determine which fixtures suit your needs and in what quantities
- By adding the wattages of the products together you arrive at the total wattage. This determines whether you need a 21 watt (item number 158A), 60 watt (item number 144A) or 100 watt (item number 145A) transformer.
- Measure how far the fixtures come from the transformer and you will know how much cable you need. Lightpro offers different lengths: 25 meters (item number 025C14), 50 meters (item number 050C14), 100 meters (item number 100C14) and 200 meters (item number 200C14) rolls. The cable can of course be cut at any desired location to obtain the correct length. Please note: at least 1 meter of cable is also included with every Lightpro fixture. The exact amount is stated for each fixture. If luminaires are placed on a fence, for example, individual extension cables of 1 meter (item number 146A) or 3 meters (item number 147A) are also available. To complete the Lightpro system, you can find it at www.lampentotaal.nl/Lightpro various types of accessories such as a motion sensor (item number 165A) or a transmitter and receiver (item number 166A) to switch on your lighting remotely. The connector type F (female) is supplied as standard. This can be used to attach the lamp to the main cable.
This Barite 40 from Lightpro is a designer patio lamp that can of course also be used as path lighting. With a 3 watt strong MR16 light source, this Barite illuminates 40 up to 75 centimeters. If you want light over the entire length, it is recommended to place this Barite 40 every one and a half meters. This means you will never walk in the dark again. The MR16 fitting ensures that you can easily change the light source if it stops working prematurely or if the supplied 3 watts are not strong enough. The 112P from Lightpro is supplied with the following: p>
- 1 meter cable and connector to connect the fixture to the 12 volt main cable from Lightpro.
- Mounting wedge to place the fixture in the ground.
- Allen wrench. This allows you to place a standing lamp on the base. Don't forget to put some Vaseline between the bolts. This prevents the floor lamp from becoming impossible to open after a number of years. Do not forget to tighten the screws securely to guarantee the IP value.
- Screws and plugs to properly mount the fixture.
- Connector type F (female) to attach the lamp to the cable.
Lightpro 12 volt system
The 12 volt system from Lightpro makes it possible for everyone to easily install lighting in the garden. It is important to look carefully at which products you want and which accessories you need.
- First check which places in the garden you want to have lighting or which parts you want to highlight.
- Then determine which fixtures suit your needs and in what quantities
- By adding the wattages of the products together you arrive at the total wattage. This determines whether you need a 21 watt (item number 158A), 60 watt (item number 144A) or 100 watt (item number 145A) transformer.
- Measure how far the fixtures come from the transformer and you will know how much cable you need. Lightpro offers different lengths: 25 meters (item number 025C14), 50 meters (item number 050C14), 100 meters (item number 100C14) and 200 meters (item number 200C14) rolls. The cable can of course be cut at any desired location to obtain the correct length. Please note: at least 1 meter of cable is also included with every Lightpro fixture. The exact amount is stated for each fixture. If luminaires are placed on a fence, for example, individual extension cables of 1 meter (item number 146A) or 3 meters (item number 147A) are also available. To complete the Lightpro system, you can find it at www.lampentotaal.nl/Lightpro various types of accessories such as a motion sensor (item number 165A) or a transmitter and receiver (item number 166A) to switch on your lighting remotely. The connector type F (female) is supplied as standard. This can be used to attach the lamp to the main cable.
- Product number 68090
- Manufacturer product number 112P
- Light source Inclusive
- Type of light amount 1
- Fitting MR16
- Wattage 3
- Type of light LED
- Amount of lumen 230
- Light colour Warm white
- Light temperature 3000
- Dimmable No
- Material Aluminium
- IP value 44
- Style Design, Rustic, Timeless
- Height 40.5
- Diameter 6.5
- Line cord 1
- Voltage 12 volt
- Transformer not included Yes
- Shape Cilinder
- Warranty 6
- Color Black
- Free shipping*
- Personal advice
- Over 25,000 lamps in stock
FAQ
I want this
Lightpro - LED pedestal light Barite 40
109.- (+ accessoires)
Prices incl. VAT plus shipping costs
3 - 5