Omschrijving
This Barite 40 from Lightpro is a designer terrace lamp that can also be used as path lighting. With a 3 watt strong MR16 light source this Barite 40 illuminates up to 75 centimeters. If you want light over the entire length, we advise you to place this Barite 40 every half meter. This way you will never walk in the dark again.
The MR16 fitting allows you to easily change the light source if it stops early or if the supplied 3 watts is not strong enough.
With the 112P from Lightpro the following is included:
- 1 meter of cable and connector to connect the fixture to the Lightpro 12 volt mains cable.
- Mounting pin to place the fixture in the ground.
- Allen key. With this you can place standing light on the foot. Do not forget to put some Vaseline between the bolts. This prevents the standing lamp from being opened again after a number of years. Do not forget to tighten the screws firmly in order to guarantee the IP value.
- Screws and plugs to mount the luminaire in the right way.
The 12 volt system from Lightpro makes it possible for everyone to easily install lighting in the garden. However, it is important to take a good look at which products you want and which accessories you need for this.
1. First check which places in the garden you wish to have lighting or which parts you wish to highlight.
2. Then determine which luminaires suit you and in what numbers
3. By adding the wattages of the products together you arrive at the total wattage. This determines whether you need a 21 watt (article number 158A), 60 watt (article number 144A) or 100 watt (article number 145A) transformer.
4. Measure how far the luminaires are coming from the transformer and you know how much cable you need. Different lengths can be obtained at Lightpro: 25 meters (article number 025C14), 50 meters (article number 050C14), 100 meters (article number 100C14) and 200 meters (article number 200C14) rolls. Of course the cable can be cut off at any desired location in order to get the correct length.
Please note: at least one meter of cable is included with each Lightpro luminaire. Exactly how much is stated for each luminaire. If luminaires are placed on, for example, a fence, individual extension cables of 1 meter (article number 146A) or 3 meters (article number 147A) are also available.
To complete the Lightpro system, you can find various types of accessories such as a motion sensor (article number 165A) or a transmitter and receiver (article number 166A) at www.lampstotal.com/lightpro to switch on your lighting at a distance.